PR Newswire

Lightweight Design: ContiTech Develops World's First Polyamide Strut Mount for Passenger Car Chassis

Wednesday, Oct 28, 2015

AUBURN HILLS, Mich., Oct. 28, 2015 /PRNewswire/ -- ContiTech Vibration Control – the strut mount specialist based in Hanover, Germany – has developed a strut mount in which fiberglass-reinforced BASF Ultramid polyamide is also used as the primary structural component. It is the first strut mount made of this material, which is used both in the front and rear axle in the chassis environment of passenger cars. The strut mount offers significant advantages over traditional variants made from steel or aluminum: a weight reduction of around 25 percent and a longer service life. At the same time, a highly insulating rubber element enhances ride comfort. In collaboration with General Motors LLC, ContiTech developed the strut mount for the new Cadillac CT6, which is set to be launched on the market at the end of 2015.

This strut mount is the world's first fiberglass-reinforced polyamide strut mount designed for use in the passenger car chassis system. For the front and rear axles, there are different versions.

"High-performance plastics are the material of the future in the automotive industry," says Kai Fruhauf, who heads ContiTech Vibration Control. "Thanks to our many years of experience and extensive materials expertise, we are among the top partners when it comes to innovative new developments with this material. This strut mount designed for passenger car bodies represents another step forward."

Enhanced Safety, Even Under Extreme Stress

In passenger cars, the spring strut mount is the interface between the spring strut and body. It enables precise and low-friction rotational movement of the spring strut in the front of the vehicle, thereby ensuring optimum contact of the tire to the road. The vehicle is easier to steer.

As a chassis component, it is subjected to extreme stress. Spray water, road salt, sand, gravel, and vibrations can cause the spring strut to wear. If it is no longer fully functional, the shock absorbers – among other things – are more highly stressed. Vibrations and noise from the axles are more pronounced, resulting in reduced ride comfort.

The new two-section, three-path bearing from ContiTech comprises both fiberglass-reinforced polyamide and aluminum components. This brand-new design can even withstand shock loading as high as 75 kN, equivalent to driving a car along a badly potholed road. The strut mount also ensures that only minimal counter-torque acts on the shock absorber. This component too is subjected to less stress which, in turn, enhances safety in the vehicle.

The new strut mount from ContiTech also enhances ride comfort. This highly durable, extremely comfortable, and innovative strut mount was developed in close cooperation with the customer. "Key to success was the early integration of our customer in the development process, which meant that we were involved in system design right from the outset and could contribute our specialist experience," reports Stefan Wohler, a developer at ContiTech Vibration Control.

ContiTech Vibration Control has been developing light weight products, using BASF Ultramid material, for the automotive industry since 2006. Product solutions include heavy-duty engine mounts, with the annual production volume in 2013 exceeding three million. In 2009 ContiTech Vibration Control also launched a lightweight transmission cross member from the lightweight material to support the forces and torques of the engine transmission unit. The weight is 50 percent less compared to an aluminum component. In 2014, ContiTech presented the first rear axle transmission cross member made from this high-performance polyamide. ContiTech has already delivered millions of torque rod supports and torque reaction mounts made from polyamide.

Continental develops intelligent technologies for transporting people and their goods. As a reliable partner, the international automotive supplier, tire manufacturer, and industrial partner provides sustainable, safe, comfortable, individual, and affordable solutions. In 2014, the corporation generated sales of approximately €34.5 billion with its five divisions, Chassis & Safety, Interior, Powertrain, Tire, and ContiTech. Continental currently employs more than 205,000 people in 53 countries.

The ContiTech division is one of the world's leading suppliers of technical elastomer products and is a specialist in plastics technology. It develops and produces functional parts, components, and systems for machine and plant engineering, mining, the automotive industry, and other important industries. Together with U.S. company Veyance Technologies Inc., which was acquired at the beginning of 2015, ContiTech generated sales of approximately €5.4 billion (pro forma basis) in 2014 and currently employs approximately 43,000 people in 43 countries worldwide.

Photo - http://photos.prnewswire.com/prnh/20151027/281118

To view the original version on PR Newswire, visit:http://www.prnewswire.com/news-releases/lightweight-design-contitech-develops-worlds-first-polyamide-strut-mount-for-passenger-car-chassis-300167672.html

SOURCE ContiTech

OTHER PR Newswire